TINKI Car Front Driver Seat Panel Trim Compatible for Mercedes-Benz W206 2022-2023 C-Class C200 C300 Interior Accessories (ABS, Carbon Fiber)

🧭Installation Instructions (For products with double-sided adhesive on the back): ➤ Ensure the surface where you want to stick products are clean, dry, and free from any dirt or debris. ➤ Carefully determine the desired installation location and compare it with the product to ensure compatibility with your vehicle. If the product doesn't fit, please contact us immediately and refrain from installing it. ➤ When removing the double-sided adhesive from the back of the products, avoid touching the adhesive with your hands to prevent any contaminants from affecting the adhesion. ➤ For optimal adhesion, we recommend using a hairdryer or lighter to heat the double-sided adhesive if the temperature is below 20 degrees Celsius. Be cautious not to heat it above 40 degrees Celsius. ➤ Align the position of products and firmly press it into place. The effectiveness of the adhesion depends on the conditions of the surface and the correct installation technique. ➤ After installation, apply firm pressure, especially on the edges of the products, and hold it for at least 2 minutes to ensure proper bonding. ➤ Avoid contact with water and keep products dry for at least 72 hours after installation. Failure to do so may result in the adhesive becoming compromised and the products falling off. 🧭Installation Instructions (For products without double-sided adhesive on the back): ➤ If the product does not come with double-sided tape on the back, installation will be easier, either by directly placing it or with the assistance of tools.