COMP Cams 26097-16 Race Endurance 1.551" OD Dual Springs; 2.000" Installed Height; 16 Springs

Elite Race double valve springs from COMP Cams have a .750 inch+ maximum lift and outside diameter of 1.539 inches. Engineered with enhanced processing for middle level fatigue resistance and designed to work with roller cams, they are widely used in dirt or asphalt late model and sportsman racing, as well as marine racing. These Elite Race valve springs will also work in some high end flat tappet applications. The metallurgists at COMP Cams scrutinize every piece of metal utilized in the creation of Elite Race valve springs to make sure they are of unsurpassable quality because fissures within the metal of standard spring wire, caused by molecular contaminants, are the weakest link in valve spring construction. These fissures appear to be immense under the scanning electron microscope but in fact, are just microns wide. Diminishing the occurrence of these fissures in the valve spring steel is the COMP Cams standard when selecting materials.

• 1.539 inches outside diameter, .731 inches inside diameter dual valve spring
• 195 pounds 2.000 inches seat load and 563 pounds 1.250 inches open load capacity
• .750 inch maximum lift
• Part number: 26097-16